Dell N1100-ON, Reference Manual

Page: 2035 / 2332

Switch Management Commands
2035
$083da883$ osapiSi 0x14f
$083c9ac0$ osapiCra 0x449
$0804b8f6$ sigsegv_h 0xa7
$0012e40c$ ?????
$083c73c3$ osa 0x187
$083c7211$ osapiDebugCorru 0x65
$082b05e3$ cliDe 0x2ab
$081ed66c$ commandDe 0x373
$0839db78$ ewsC 0xbf
$083a0c22$ ewsC 0x3045
$0839b295$ ewaNetTelnetDataIn 0x959
$0839a928$ ewaNetTeln 0x30
$083a7b73$ ewsTelne 0x2b9
$08387592$ ew 0x162a
$08372fbc$ 0x149
$08395caf$ 0x17c
$083996de$ emwe 0x1a3
$083d6f71$ osapi_task_w 0xa6
$00134e99$ ?????
$0021873e$ ?????
-----------------------------------------
debug dhcp packet
Use the debug dhcp packet command to display debug information about
DHCPv4 client activities and to trace DHCPv4 packets to and from the local
DHCPv4 client. To disable debugging, use the no form of this command.
Syntax
debug dhcp packet [ transmit | receive ]
no debug dhcp packet [ transmit | receive ]
Default Configuration
By default, DHCP client packet tracing is disabled.
Command Mode
Privileged Exec