Layer 3 Routing Commands
1772
console(config-if-vlan15)#ip irdp maxadvertinterval 600
ip irdp minadvertinterval
Use the
ip irdp minadvertinterval
command in Interface Configuration
mode to configure the minimum time, in seconds, allowed between sending
router advertisements from the interface. Use the no form of the command to
set the time to the default value.
Syntax
ip irdp minadvertinterval
integer
no ip irdp minadvertinterval
• integer — Minimum time in seconds allowed between sending router
advertisements from the interface. (Range: 3 to value of maximum
advertisement interval in seconds)
Default Configuration
The default value is 0.75 times the maximum advertisement interval.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets minimum advertisement interval at 100 seconds
for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp minadvertinterval 100
Summary of Contents for N1100-ON
