Dell N1100-ON, Reference Manual

Page: 1759 / 2332

Layer 3 Routing Commands
1759
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0
show ipv6 ospf interface
Use the show ipv6 ospf interface command to display the information for the
IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface [interface-type interface-number]
• interface-type—The interface type, VLAN, tunnel or loopback
• interface-number—The valid interface number, a valid VLAN ID, tunnel
identifier (Range: 0–7) or loopback identifier (Range: 0–7).
Default Configuration
This command has no default configuration.