Dell N1100-ON, Reference Manual

Page: 1698 / 2332

Layer 3 Routing Commands
1698
Example
console#show ip ospf lsa-group
Total self-originated LSAs: 3019
Average LSAs per group: 100
Pacing group limit: 400
Number of self-originated LSAs within each LSA group...
Group Start Age Group End Age Count
0 59 96
60 119 88
120 179 102
180 239 95
240 299 95
300 359 92
360 419 48
420 479 58
480 539 103
540 599 99
600 659 119
660 719 110
720 779 106
780 839 122
840 899 110
900 959 99
960 1019 135
1020 1079 101
1080 1139 94
1140 1199 115
1200 1259 110
1260 1319 111
show ip ospf neighbor
Use the show ip ospf neighbor command to display locally derived
information about OSPF neighbors. The information below only displays if
OSPF is enabled and the interface has a neighbor.
Syntax
show ip ospf neighbor [ vrf vrf-name] [interface-type interface-number]
[neighbor-id]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.