Dell N1100-ON, Reference Manual

Page: 1664 / 2332

Layer 3 Routing Commands
1664
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
A value of 1 is the highest router priority. A value of 0 indicates that the
interface is not eligible to become the designated router on this network.
Example
The following example sets the OSPF priority for the VLAN 15 router at 100.
console(config-if-vlan1)#ip ospf priority 100
ip ospf retransmit-interval
Use the ip ospf retransmit-interval command in Interface Configuration
mode to set the OSPF retransmit Interval for the specified interface. Use the
no form of the command to return the interval to the default value.
Syntax
ip ospf retransmit-interval seconds
no ip ospf retransmit-interval
• seconds — Number of seconds between link-state advertisement
retransmissions for adjacencies belonging to this router interface. This
value is also used when retransmitting database description and link-state
request packets. (Range: 0–3600 seconds)
Default Configuration
5 is the default number of seconds.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
A value of 1 is the highest router priority. A value of 0 indicates that the
interface is not eligible to become the designated router on this network.