Dell N1100-ON, Reference Manual

Page: 1589 / 2332

Layer 3 Routing Commands
1589
User Guidelines
Use the summary option to summarize the information displayed.
Example
The following example displays multicast configuration settings.
console#show ip mroute source 10.1.1.1 summary
console#show ip mroute source 10.1.1.1 239.5.5.5
show ip mroute static
Use the show ip mroute static command to display all the static routes
configured in the static mcast table if it is specified or display the static route
associated with the particular sourceipaddr.
Syntax
show ip mroute static [sourceipaddr]
• sourceipaddr — IP address of source.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the static routes configured in the static
mcast table.
console#show ip mroute static
MULTICAST STATIC ROUTES
Source IP Source Mask RPF Address Preference
--------------- --------------- --------------- ----------