Dell N1100-ON, Reference Manual

Page: 1555 / 2332

Layer 3 Routing Commands
1555
show ipv6 neighbors
Use the show ipv6 neighbors command to display information about the IPv6
neighbors.
Syntax
show ipv6 neighbors
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the IPv6 neighbors.
console(config)#show ipv6 neighbors
Neighbor Last
IPv6 Address MAC Address isRtr State Updated
Interface
-------------------- ----------------- ----- ------- ---------
show ipv6 protocols
Use the show ipv6 protocols command to display information about the
configured IPv6 routing protocols
Syntax
show ipv6 protocols
Default Configuration
There is no default configuration for this command.