Dell N1100-ON, Reference Manual

Page: 1349 / 2332

Layer 3 Routing Commands
1349
Command Mode
Privileged Exec and Global Config modes
User Guidelines
The following fields are displayed.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#show ip bgp extcommunity-list 1
Standard extended community-list list1
permit RT:1:100 RT:2:100
deny RT:6:600
permit RT:5:200
permit SOO:9:900
show ip bgp listen range
Use the show ip bgp listen range command to display information about IPv4
BGP listen ranges.
Syntax
show ip bgp [vrf vrf-name ] listen range [ network/length ]
• network/length — Displays information about the specified listen range.
• vrf-name—The name of a previously configured VRF.
Field Description
Standard extended
community-list
The standard named extended community list.
permit Permits access for a matching condition. Once a permit
value has been configured to match a given set of
extended communities the extended community list
defaults to an implicit deny for all other values.
RT The route target extended community attribute.
deny Denies access for a matching condition.