Dell N1100-ON, Reference Manual

Page: 1183 / 2332

Data Center Technology Commands
1183
Syntax
clear priority-flow-control statistics [ethernet interface ]
• interface — A valid Ethernet port.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example #1
console#clear priority-flow-control statistics tengigabitethernet 1/0/1
Example #2
console#clear priority-flow-control statistics
show interfaces priority-flow-control
Use the show interfaces priority-flow-control command to display the global
or interface priority flow control status and statistics.
Syntax
show interfaces interface-id priority-flow-control
• interface-id—A valid Ethernet port identifier.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
NOTE: This command is only available on N40xx series switches.
This command has no user guidelines.
Examples
The following examples show the priority flow control status and statistics.
s1#show interfaces tengigabitethernet 1/0/1 priority-flow-control