Dell MXG061 Service Manual Download Page 58

Page: 58 / 64

Flashing the BIOS: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/flshbios.htm[2/21/2014 11:23:54 AM]

Back to Contents Page

Flashing the BIOS

Dell™ XPS™ M1710 Service Manual

NOTICE:

Plug the AC adapter into a known good power source to prevent a loss of power. Failure to do so may cause

system damage.

1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.

NOTE:

If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD so that you can

set up the computer to boot from a CD this one time only. Otherwise, you must enter the system setup program to

change the default boot order.

2. Insert the BIOS update program CD, and turn on the computer.

NOTICE:

Do not interrupt this process once it begins. Doing so may cause system damage.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When

the flash update is complete, the computer will automatically reboot.

3. Press <F2> during POST to enter the system setup program.

4. Press <Alt> and <f> to reset the computer defaults.

5. Press <Esc>, select

Save changes and reboot

, and press <Enter> to save configuration changes.

6. Remove the flash BIOS update program CD from the drive and restart the computer.

Back to Contents Page

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands