Dell MR2416 User Manual Download Page 54

Page: 54 / 66

| Operating

the

Monitor

Setting the Maximum Resolution

To set the maximum resolution for the monitor:

In Windows

7, Windows

8, Windows

8.1, and Windows

10:

For Windows

8 and Windows

8.1 only, select the Desktop tile to switch to classic

desktop.

Right-click on the desktop and click

Screen Resolution

Click the Dropdown list of the Screen Resolution and select

1920 x 1200

Click

If you do not see 1920 x 1200 as an option, you may need to update your graphics driver.
Depending on your computer, complete one of the following procedures:

If you have a Dell desktop or portable computer:

•

Go to

http://www.dell.com/support

, enter your service tag, and download the

latest driver for your graphics card.

If you are using a non-Dell computer (portable or desktop):

•

Go to the support site for your computer and download the latest graphic drivers.

•

Go to your graphics card website and download the latest graphic drivers.

Summary of Contents for MR2416



































































Search results

Summary of Contents for MR2416

Reviews:

Related manuals for MR2416

Brands by name

Popular brands

Dell MR2416, User Manual

Search results

Summary of Contents for MR2416

Reviews:

Related manuals for MR2416

Brands by name

Popular brands