Dell Latitude V700 Service Manual Download Page 58

Page: 58 / 60

RJ-11/RJ-45 Board : Dell Latitude V700 Service Manual

Back to Contents Page

RJ-11/RJ-45 Board

Dell™ Latitude™ V700 Service Manual

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any

installed battery.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal surface on the computer.

Removing the Protective Covers From the RJ-11 and RJ-45

Connectors

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove one or both of the plastic connector covers (one or both of the covers may be installed)

by slipping a nonmarring tool into the cutout at the top and pivoting the tool up to disengage

the inner securing tab.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...k/Latitude/V700/v700_SERVICE_MANUAL/modem.htm (1 of 3)6/21/2004 2:51:07 AM

Summary of Contents for Latitude V700





























































Search results

Summary of Contents for Latitude V700

Reviews:

Related manuals for Latitude V700

Brands by name

Popular brands

Dell Latitude V700, Service Manual

Search results

Summary of Contents for Latitude V700

Reviews:

Related manuals for Latitude V700

Brands by name

Popular brands