Before You Begin : Dell Latitude V700 Service Manual
NOTICE:
To avoid possible damage to the system board, wait 10 to 20 seconds before you
disconnect any attached devices.
7. Disconnect all external cables and attached devices from the computer.
8. Remove any installed PC Cards or plastic blanks from the PC Card slot.
9. Close the display and turn the computer upside down on a flat work surface.
10. Remove the battery from the battery bay.
NOTICE:
To avoid damaging the system board, you must remove the battery before you
service the computer.
11. Remove any installed device in the media bay.
Recommended Tools
●
#1 magnetized Phillips-head screwdriver
●
Small flat-blade screwdriver
●
Pry stick
●
Small plastic scribe
●
Microprocessor extractor
●
Flash BIOS update program floppy disk or CD (required only when upgrading the
microprocessor or replacing the system board)
Screw Identification
Before removing and replacing components, photocopy the screw placemat as a tool to help keep track
of the screws. The placemat provides the number of screws and the sizes.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/V700/v700_SERVICE_MANUAL/begin.htm (2 of 5)6/21/2004 2:50:58 AM
