manualshive.com logo in svg

Dell Latitude LM, Service Manual, Page: 14 / 87

Share
Download
Dell Latitude LM Service Manual Download Page 14

System Overview

1-3

Status Display

. 

Figure 1-3.  Status Display Panel

The status display panel is located directly above the keyboard. This panel 
shows icons that indicate keyboard operation or suspend mode; CD-ROM, 
hard-disk drive, diskette drive, and PC Card activity; and status of the power 
source (AC power or batteries). 

Keyboard Indicators

The following icons indicate the status of the keyboard and whether the com-
puter is in suspend mode.

Caps Lock Indicator

Press <

CAPS LOCK

> to activate this feature. Press

<

CAPS LOCK

> again to deactivate the feature.

Num Lock Indicator

Press <

NUM LOCK

> to activate this feature. Press 

<

NUM LOCK

> again to deactivate this feature.

Pad Lock Indicator

This indicator appears when the embedded keypad is 
active. To activate the embedded numeric keypad, press 
<

FN

><

NUM LOCK

>. Press <

NUM LOCK

>

 

to toggle between the 

cursor keys and number keys. 

Scroll Lock Indicator

Press <

SCROLL LOCK

> to activate this feature. Press 

<

SCROLL LOCK

> again to deactivate this feature.

Suspend Mode

When all indicators are present and appear to be rolling the 
computer is in suspend mode. 

CD-ROM/Hard-Disk Drive Indicator

This indicator blinks when data is being transferred to or from the 
CD-ROM or hard-disk drive.

Summary of Contents for Latitude LM
























































































Reviews:

No comments