manualshive.com logo in svg

Dell Latitude E6420 XFR, Setup And Features Information, Page: 19 / 23

Share
Download
Dell Latitude E6420 XFR Setup And Features Information Download Page 19

Dell Latitude E6420 XFR Setup and Features Information

Specifications       |      

Page 19

Specifications

 

NOTE: 

Offerings may vary by region. The following specifications are only those required by law 

to ship with your computer. For more information regarding the configuration of your computer, 

click Start > Help and Support and select the option to view information about your computer. 

System Information

Chipset

Intel Mobile Express Series 6 chipset

DRAM bus width

64-bit

Flash EPROM

SPI 32 Mbits

PCIe Gen1 bus

100 MHz

Processor

Types

•  Intel Core i3 series
•  Intel Core i5 series
•  Intel Core i7 series

L2 cache

Up to 6 MB

External bus frequency 1333 MHz

Memory

Memory connector

Two SODIMM slots

Memory capacity

1 GB, 2 GB, or 4 GB

Memory type

DDR3 SDRAM (1333 MHz)

Minimum memory

2 GB

Maximum memory

8 GB

Audio

Type

four-channel high definition audio

Controller

IDT 92HD90

Stereo Conversion

24-bit (analog-to-digital and digital-to-analog)

Interface:

Internal

high definition audio

External

microphone-in/stereo headphones/external speakers connector ( )

Speakers

two

Internal speaker 

amplifier

0.5 W (typical) per channel

Volume controls

keyboard function keys, program menus

Video

Video type

•  integrated on system board
•  discrete

Summary of Contents for Latitude E6420 XFR
























Reviews:

No comments