Option
Description
Hyper-Thread
Control
Allows you to enable or disable the Hyper-Threading in the processor.
●
Disabled
●
Enabled
Default setting: Enabled.
Power Management screen options
Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
●
Disabled
●
Every Day
●
Weekdays
●
Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
●
Enable USB Wake Support
Default setting: The option is disabled.
Wireless Radio
Control
Allows you to enable or disable the feature that automatically switches from wired or wireless networks
without depending on the physical connection.
●
Control WLAN Radio
●
Control WWAN Radio
Default setting: The option is disabled.
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
●
Disabled
●
LAN Only
●
WLAN Only
●
LAN or WLAN
Default setting: Disabled
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.
Dock Support on
Battery
This option allows you to use the docking station when AC power is absent but only when the battery is
above a certain charge percentage. The percentage may change per battery and per platform.
●
Dock Support on Battery
Default setting: Disabled
50
BIOS setup
