Dell Latitude E5470 Owner'S Manual Download

Page: 48 / 63

Option

Description

Password
Configuration

Allows you to determine the minimum and maximum length of Administrator and System passwords.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:

●

Disabled

●

Reboot bypass

Default setting: Disabled

Password
Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.

Default setting:

Allow Non-Admin Password Changes

is selected.

Non-Admin Setup
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled the setup options are locked by the admin password.

UEFI Capsule
Firmware Update

This option controls whether the system allows the BIOS updates through UEFI capsule update packages.
This option is disabled by default.

TPM

1.2

Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

●

TPM On (enabled by default)

●

Clear

●

PPI Bypass for Enabled Commands

●

PPI Bypass for Disabled Commands

●

Disabled

●

Enabled

Computrace

Allows you to activate or disable the optional Computrace software The options are:

●

Deactivate

●

Disable

●

Activate

NOTE:

The Activate and Disable options will permanently activate or disable the feature and no

further changes will be allowed

Default setting: Deactivate

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.

Enable CPU XD Support (default)

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot.
The options are:

●

Enable

●

One Time Enable

●

Disable

Default setting: Enable

Admin Setup
Lockout

Allows you to prevent users from entering the setup when an Administrator password is set.

Default Setting: Enable Admin Setup Lockout is not selected.

Secure Boot screen options

Option

Description

Secure Boot
Enable

This option enables or disables the

Secure Boot

feature.

●

Disabled

●

Enabled

Default setting: Enabled.

BIOS setup

Summary of Contents for Latitude E5470
































































Search results

Summary of Contents for Latitude E5470

Reviews:

Related manuals for Latitude E5470

Brands by name

Popular brands

Dell Latitude E5470, Owner'S Manual

Search results

Summary of Contents for Latitude E5470

Reviews:

Related manuals for Latitude E5470

Brands by name

Popular brands