4.
After removing the optical-drive bracket, perform the following steps:
a) Remove the screws that secure the optical-drive bracket [1].
b) Remove the optical-drive bracket from the optical drive [2].
5.
Disengage the optical drive bezel tabs to separate the optical drive bezel from the optical drive.
6.
Remove the optical-drive bezel.
Installing the Optical Drive
1.
Engage the optical-drive bezel tabs to attach the optical-drive bezel to the optical drive.
2.
Install the optical-drive bracket.
3.
Tighten the screws to secure the optical-drive bracket.
4.
Insert the optical drive into the computer.
5.
Tighten the screw to secure the optical drive in its place.
6.
Install:
a) base cover
b) battery
7.
Follow the procedures in
After Working Inside Your Computer
.
19
