Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Palm Rest
Dell™ Latitude™ C610/C510 Service Manual
Removing the Palm Rest
Removing the Palm Rest
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the following
procedure.
1. Remove the
hard drive
.
2. Remove the
keyboard
.
NOTICE:
You must remove the display assembly before you remove the palm rest; the
display hinges pass through the back of the palm rest.
3. Remove the
display assembly
and
hinge covers
.
4. Turn the computer over and remove the three M2.5 x 12-mm screws labeled "circle P."
Palm Rest Screw Removal
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (1 of 4) [2/28/2004 7:55:50 AM]