
Display Assembly, Display Latch, and Hinge Covers: Dell Latitude C610/C510 Service Manual
3. Replace the tape that secures the display panel connector and the tape that secures the
middle of the display-feed flex cable to the display panel.
4. Place the bottom edge of the display panel in the bottom of the top cover and elevate the
top of the panel with your hand.
5. Lay the display panel in the top cover.
6. Reinstall the five M2 x 4-mm screws that secure the display panel to the top cover.
Display Latch
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
Removing the Display Latch
1. Remove the
hard drive
.
2. Remove the
display assembly
.
3. Remove the
display bezel
.
4. Remove the two M2.5 x 5-mm screws and the two M1.7 x 3.5-mm screws that secure the
display latch and bracket to the top cover.
5. Lift the display latch and bracket up and out of the top cover.
Display Latch Removal (14.1-Inch XGA Panel Shown)
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/display.htm (8 of 12) [2/28/2004 7:55:49 AM]