NOTE:
A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws.
4. Install the
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing PCIe SSD
Before working inside your computer
.
2. Remove the .
3. Disconnect the battery cable from the connector on the system board.
4. To remove the PCIe SSD:
a. Loosen the M2 x3 captive screw that secure the SSD bracket [1].
b. Remove the SSD bracket [2].
c. Remove the PCIe SSD from the connector on the system board [3].
Installing PCIe SSD
1. Insert the PCIe SSD card into the connector.
2. Install the SSD bracket over the PCIe SSD card.
16
Disassembly and reassembly