Steps
1. Place the heatsink assembly into the slot in the system board and replaced the five (M2x2.5) screws to secure it to the system board.
2. Reconnect the fan cable to the connector on the system board.
3. Place the WLAN bracket onto the WLAN antennas and replace the single (M2x2.5) screw that secures the shield plate to te system
board
NOTE:
The fan cable must be routed under the shield plate.
Next steps
1. Reconnect the
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
Disassembly and reassembly
39
