Option
Description
Boot sequence
options
•
Windows boot manager
•
WindowsIns
Boot list options
•
Legacy
•
UEFI—selected by default
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the
Enable Legacy Option ROMs
is disabled.
Enable Attempt Legacy Boot is disabled by default.
UEFI boot path
security
•
Always, except internal HDD
•
Always
•
Never
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
AHCI
•
RAID On: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SATA-2 — enabled by default
•
M.2 PCIe SSD-0 — enabled by default
•
M.2 PCIe SSD-1 — enabled by default
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
Enable SMART Reporting
USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices—HDD, memory key, floppy.
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
Enable USB Boot Support—enabled by default
•
Enable External USB Port—enabled by default
System setup
49
