a
b
c
d
NOTE:
To install both cards if equipped.
6
Follow the procedure in
After working inside your computer
.
Speaker
Removing the speaker module
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
e
3
To disconnect the cables:
a Disconnect and fold back the smart card cable from the USH board [1].
b Disconnect and fold back the LED daughter board FFC from the LED daughter board for easy access in removing the speaker
module [2].
4
To release the speaker module:
a Disconnect the speaker cable from the connector on the system board [1].
b Un route the speaker cable from the retention clips and remove the tapes that secure the speaker cable [2].
16
Removing and installing components
