b)
c)
d)
e)
f)
g)
6. Follow the procedure in
After working inside your tablet
WWAN Antenna
Removing the WWAN antenna module
Steps
1. Follow the procedure in
Before working inside your tablet
2. Remove the:
a)
b)
c)
d)
3. To remove the antenna module:
a) Unthread the WWAN main antenna from the system board.
b) Release the clips on the left and right side of the WWAN main antenna module securing it to the system
c) Flip over the WWAN main antenna module to release it from the system board.
d) Remove the WWAN main antenna module from the system.
NOTE:
WLAN antenna is part of the system base and cannot be replaced separately.
Disassembly and reassembly
67
Summary of Contents for Latitude 7210 2-in-1
