Steps
1. Place the I/O board on the palm-rest and keyboard assembly.
2. Align the screw hole on the USB Type-C port bracket with the screw hole on the system board.
3. Connect the screw (M2x4) that secures the USB Type-C port bracket to the system board.
NOTE:
Ensure to connect IO marked side of the I/O-board cable to the I/O daughter board and the side marked MB
to the system board.
4. Connect the I/O-board cable to the connector on the system board and I/O board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
About this task
The following images indicate the location of the display assembly cable and display-assembly hinges and provide a visual representation of
the removal procedure.
34
Removing and installing components
