Steps
1. Connect the fan cable to the system board.
2. Slide fan below the heat sink and align the screw holes on fan with the screw holes on the system board and palm-rest and keyboard
assembly.
3. Replace the two screws (M2x4) that secure the fan to the system board and palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Removing the left fan
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
About this task
The following images indicate the location of the left fan and provide a visual representation of the removal procedure.
26
Removing and installing components