Steps
1. Connect the battery cable to the system board.
2. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly.
3. Starting from the bottom-right corner snap the base cover. Work your way around to the middle of the base cover and then to the
bottom-left corner and snap the base cover into place.
4. Replace the eight screws (M2x3) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
NOTE:
After your computer is reassembled and powered on, it prompts for the Real Time Clock (RTC) reset. When the
RTC reset cycle occurs, the computer restarts several times and then an error message is displayed- "Time of day not
set". Enter the BIOS when this error appears and set the date and time on your computer to resume normal
functionality.
1. Follow the procedure in
After working inside your computer
.
Battery
Removing the battery
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
Removing and installing components
15
