manualshive.com logo in svg

Dell Latitude 5495, Owner'S Manual

Share
Download
Dell Latitude 5495 Owner'S Manual Download Page 33

Installing the heat sink assembly

NOTE: 

This procedure is only for the UMA model. In the discrete model, heat sink is secured to the system board with four 

screws.

1 

Place the heat sink assembly on the system board.

2 

Replace the six (M2x3) screws that secure the heat sink assembly on the system board.

NOTE: 

•

Replace the heat sink assembly screws in sequential order as indicated on the heat-sink.

3 

Connect the system fan cable to the connector on system board.

4 

Install the :

a

chassis frame

b

WWAN card (optional)

c

WLAN card

d

SSD frame

e

SSD card 

f

hard drive 

g

battery

h

base cover

5 

Follow the procedure in 

After working inside your computer

.

Keyboard lattice and Keyboard

Removing keyboard lattice

1 

Follow the procedure in 

Before working inside your computer

.

2 

Pry the keyboard lattice from one of the recess points [1] and continue prying the sides in clockwise or anticlockwise direction, and 
then lift the keyboard lattice from the system [2]

Disassembly and reassembly

33

Summary of Contents for Latitude 5495






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands