3
Tighten the single (M2x6) captive screw to secure the battery to the system.
4
Connect the battery cable to the connector on the system board.
5
Install the
.
6
Follow the procedure in
After working inside your computer
.
Solid State Drive — optional
Removing the SSD card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
3
To remove the Solid State Drive (SSD) card:
a Remove the single (M2x3) screw that secures the SSD to the system [1].
b Peel the adhesive mylar shield that secures the SSD card [2].
NOTE:
Need to be removed carefully in order to be reused on the replacement SSD.
c Slide and lift the SSD from the system [3].
Removing and installing components
15