Dell Latitude 5411, Service Manual

Page: 37 / 103

4. Align and place the heatsink assembly into the slot.
5. Replace the seven (M2x3) screws to secure the heatsink assembly to the system board.
6. Connect the heatsink fan cable to the connector on the system board.
Pașii următori
1. Install the inner frame
2. Install the battery .
3. Install the base cover .
4. Follow the procedure in After working inside your computer .
Portul de intrare c.c.
Removing the DC-in
Cerințe preliminare
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the heatsink-discrete .
Despre această sarcină
The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.
Dezasamblarea și reasamblarea 37