About this task
The figure indicates the location of the heat sink and provides a visual representation of the installation procedure.
Steps
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system board.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
Removing the heat sink - discrete
NOTE:
The heat sink type in your computer varies depending on the configuration ordered.
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
4. Remove the
.
About this task
The figure indicates the location of the heat sink and provides a visual representation of the removal procedure.
50
Lahtivõtmine ja kokkupanek
Summary of Contents for Latitude 5401
