Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
after working inside your computer
.
Removing the speakers (in 4-cell battery configuration)
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
42
Lahtivõtmine ja kokkupanek
Summary of Contents for Latitude 5401
