Dell Latitude 5320, Service Manual

Page: 33 / 116

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Slide the securing rod over the hook and press it down.
4. Align and place the solid-state drive thermal plate and press to fit it firmly to cover the solid-state drive.
5. Replace the two screws (M2x2.5) that secure the solid-state drive thermal plate to the system board.
Next steps
1. Install the base cover .
2. Connect the AC adapter and power on the system.
3. Follow the procedure in
After working on your computer .
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Enter service mode .
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure
of M.2 2230 SSD.
Removing and installing components 33