a
b
5
Follow the procedure in
After working inside your computer
.
Removing the SSD with holder
For models shipped with 2230 SSDs, the SSD requires installation of a specific holder over the SSD for securing the SSD in place.
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
3
To remove the SSD with holder:
a Remove the single (M2*3) screw that secures the SSD holder to the system [1].
b Slide and lift the SSD holder with SSD from the system [2].
Installing the SSD with holder
1
Insert the SSD card with holder into the connector on the system.
2
Replace the single (M2*3) screw to secure the SSD holder to the system.
3
Install the :
a
12
Removing and installing components
Summary of Contents for Latitude 5290
Page 1: ...Latitude 5290 Owner s Manual Regulatory Model P27S Regulatory Type P27S002 ...
Page 23: ...Removing and installing components 23 ...
Page 85: ...Video driver Verify if the video driver is already installed in the system Software 85 ...
Page 88: ...Image device driver Verify if the image device driver is installed in the system 88 Software ...
