Installing the antenna module
1. Insert the antenna module into the slot on the back cover of the tablet.
2. Tighten the M1.6 x 3 screw to secure the antenna module.
3. Route the antenna cables to the routing channels.
4. Affix the tape and the conductive tapes to secure the antenna cables.
5. Install the:
a.
b.
c.
d.
e.
f.
g.
h.
i.
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
After working inside your tablet
.
USH board
Removing the USH board
Before working inside your tablet
.
Using your tablet
39
