2. Replace the M1.6 x 3.0 screw to secure the rear camera module.
3. Connect the rear camera cable to the system board.
4. Install the:
a.
b.
c.
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
After working inside your tablet
.
Smart Card Cage
Removing the smart card cage
NOTE:
Always remove the smart card from the smart card reader.
Before working inside your tablet
.
2. Remove the:
a.
NOTE:
uSIM card slot is available only on tablets shipping with WWAN module.
b.
3. To disconnect the cables:
a. Disconnect the smart card cable from the smart card cage [1].
b. Remove the M2.0 x 2.5 screws from the smart card module [2].
c. Lift the smart card cage from the tablet [3].
Using your tablet
31