a Remove the M2xL3 screw that secures the WLAN metal bracket to the system [1].
b Lift and remove the metal bracket off the WLAN card [2].
c Disconnect the two WLAN cables that connect the WLAN card to the antenna [3].
d Pull out the WLAN card from its connector on the system board [4].
Installing WLAN card
1
Insert the WLAN card into its connector on the system board.
2
Connect the two antenna cables to the WLAN card.
3
Replace the metal bracket on the WLAN.
4
Tighten the M2xL3 screw to secure the WLAN card and bracket to the system board.
5
Install the:
a
b
c
6
Follow the procedure in
After working inside your computer
.
Memory Module
Removing the memory module
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
16
Removing and installing components