Steps
1. Align and place the battery in the slot on the chassis.
2. Install the three (M2x3) screws to secure the battery in place.
3. Route the battery cable through the routing channel in the battery.
4. Connect the battery cable to the connector on the battery and adhere the adhesive tape.
5. Adhere the adhesive tapes to secure the battery in place.
Next steps
1. Install the
.
2. Exit the
.
3. Install the
.
After working on your computer
.
Removing the 4-cell battery
Prerequisites
before working inside your computer
.
2. Remove the
3. Enter the
.
4. Remove the
.
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
Removing and installing components
31
