Dell Latitude 3120, Service Manual

Page: 51 / 90

Steps
1.
NOTE: The bezel screws are covered with disposable cosmetic mylar stickers that must not be peeled off before bezel
screw removal.
Remove the four screws (M2.5x3.8) that secure the display bezel on the display assembly.
2. Use a plastic scribe to carefully pry open the recesses near the left and right hinges on the bottom edge of the display bezel.
3. Use the scribe to pry open the top, left, and right sides of the display bezel.
4. Lift and remove the display bezel from the display assembly.
Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: The following steps are for Latitude 3120 systems.
The following images indicate the location of the display bezel and provide a visual representation of the installation procedure.
Removing and installing components 51