Dell Inspiron One 2020 Owner'S Manual Download Page 23

Page: 23 / 110

Hard

Drive |

Replacing the Hard Drive

Procedure

Align the screw holes on the hard-drive cage with the screw holes on the

hard drive.

Replace the screws that secure the hard-drive cage to the hard drive.

Connect the power and data cable to the connector on the hard-drive assembly.

Place the hard-drive assembly on the chassis and slide the hard-drive assembly

into place. Ensure that the slots on the hard-drive cage are secured under the tabs
on the chassis.

Replace the screws that secure the hard-drive assembly to the chassis.

Postrequisites

Replace the back cover. See "Replacing the Back Cover" on page 20.

Replace the stand. See "Replacing the Stand" on page 18.

Replace the stand cover. See "Replacing the Stand Cover" on page 16.

Follow the instructions in "After Working Inside Your Computer" on page 13.

book.book Page 23 Monday, April 16, 2012 3:04 PM

Summary of Contents for Inspiron One 2020















































































































Search results

Summary of Contents for Inspiron One 2020

Reviews:

Related manuals for Inspiron One 2020

Brands by name

Popular brands

Dell Inspiron One 2020, Owner'S Manual

Search results

Summary of Contents for Inspiron One 2020

Reviews:

Related manuals for Inspiron One 2020

Brands by name

Popular brands