manualshive.com logo in svg

Dell Inspiron D27M, Service Manual, Page: 29 / 150

Share
Download
Dell Inspiron D27M Service Manual Download Page 29

Identifier

GUID-44D4910E-043B-495A-A75E-DCBD5E9F4C43

Status

Released

Replacing the front cover

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Identifier

GUID-DFAAB95D-7FA7-4F38-A607-DD3EC00CDD4C

Status

Released

Procedure

1 

Align and insert the front-cover tabs into the front-panel slots and snap into 
place.

2 

Replace the screw (6-32UNCx3.6) that secures the front cover to the chassis.

Identifier

GUID-8242C53A-B8DC-4B1A-B0E1-4631712DC2AC

Status

Released

Post-requisites

Replace the 

right-side cover

.

29

Summary of Contents for Inspiron D27M























































































































































Reviews:

No comments