Dell Inspiron Chromebook 7486, Service Manual

Page: 40 / 93

Replacing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer . After working inside your computer, follow the instructions in After working inside
your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.
1 Place the display assembly and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.
2 Replace the four screws (M2.5x5) that secure the display hinges to the I/O board and system board.
3 Connect the display cable to the system board and close the latch to secure the cable.
4 Connect the touch-screen cable to the system board.
5 Align the screw holes on the display-cable bracket with the screw holes on the system board.
6 Replace the two screws (M2x4) that secure the display-cable bracket to the system board.
Post-requisites
1 Replace the wireless card .
2 Replace the base cover .
23
40 Replacing the display assembly