Dell Inspiron 8000 Service Manual Download Page 13

Page: 13 / 105

Solving Problems : Dell Inspiron 8000

Verify that the printer is recognized by Windows—

1. Click the

Start

button, point to

Settings

, and then click

Printers

If the printer is listed, right-click the printer icon, click

Properties,

and then select the

Details

tab.

2. Ensure that the

Print to the following port:

setting is

LPT1

(Printer Port)

Reinstall the printer driver—

See "Installing the Printer Driver" in the

Dell

Solutions Guide

that came with your computer.

If you cannot print to a USB printer

Verify the printer cable connections—

Ensure that the printer cable is

connected correctly.

Test the electrical outlet—

Ensure that the electrical outlet is working by

testing it with another device, such as a lamp.

Ensure that the printer is turned on—

See the documentation supplied

with the printer.

Verify that the printer is recognized by Windows—

1. Click the

Start

button, point to

Settings

, and then click

Printers

If the printer is listed, right-click the printer icon, click

Properties,

and then select the

Details

tab.

2. Ensure that the

Print to the following port:

setting is

USB

Reinstall the printer driver—

See "Installing the Printer Driver" in the

Dell

Solutions Guide

that came with your computer.

Modem Problems

NOTICE:

Connect the modem to an analog telephone wall jack only. Connecting the modem to

a digital telephone network damages the modem.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...20ok/Inspiron/8000/8000_SERVICE_MAN/solving.htm (6 of 15)6/21/2004 1:07:21 AM

Summary of Contents for Inspiron 8000










































































































Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands

Dell Inspiron 8000, Service Manual

Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands