Replacing the keyboard
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1. Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.
2. Replace the 19 screws (M1.2x1.5) that secure the keyboard to palm-rest assembly.
3. Align the screws holes on the keyboard bracket with the screw holes on the keyboard.
4. Adhere the tapes that secure the keyboard bracket to the palm-rest assembly.
5. Replace the 24 screws (M1.2x1.4) that secure the keyboard bracket to keyboard.
58
Removing and installing components
