Steps
1. Place the battery on the palm-rest and keyboard assembly and align the screw holes on the battery with the screw holes on
the palm-rest and keyboard assembly.
2. Replace the seven screws (M2x4) to secure the battery to the system board and palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Memory modules
Removing the memory modules
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Disconnect the
.
About this task
The figure indicates the location of the memory module and provides a visual representation of the removal procedure.
18
Removing and installing components
Summary of Contents for Inspiron 7590
Page 1: ...Inspiron 7590 Service Manual Regulatory Model P83F Regulatory Type P83F001 July 2021 Rev A05 ...
Page 54: ...54 Removing and installing components ...
Page 55: ...Removing and installing components 55 ...
Page 57: ...Removing and installing components 57 ...
