Option
Description
•
Control WLAN Radio
•
Control WWAN Radio
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
Disabled
•
LAN Only
•
WLAN Only
•
LAN or WLAN
Default setting: Disabled
Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•
Enable peak shift (disabled)
•
Set battery threshold
Advanced Battery
Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
charging algorithm and other techniques, during the non-work hours to improve the battery health.
Primary Battery
Charge
Configuration
Allows you to select the charging mode for the battery. The options are:
•
Adaptive (default)
•
Standard — Fully charges your battery at a standard rate.
•
ExpressCharge — The battery charges over a shorter period of time using Dell’s fast charging technology. This
option is enabled by default.
•
Primarily AC use
•
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Type-C connector
power
•
7.5 Watts(selected by default)
•
15 Watts
POST Behavior screen options
Option
Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Keypad
(Embedded)
Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
•
Fn Key Only: This option is enabled by default.
•
By Numlock
System setup
77
