Installing the palmrest
1
Align the palmrest on the computer and press until it snaps in its place.
2
Replace the 11 screws M2.5x5.0, M2.0x3.0) that secure the palmrest to the computer.
3
Connect the following cables:
a system board cable
b fan cable
4
Flip the computer and tighten the 15 screws (M2.5x5.0, M2.0x8.0, M2.0x3.0) at the bottom of the computer.
5
Install the:
a
b
c
d
e
6
Follow the procedure in
After working inside your computer
.
Speaker
Removing the speakers
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
f
3
To remove the speaker:
a Disconnect the speaker cable from the system board [1].
b Unroute the speaker cable and remove the cable from the routing tabs.
c Lift the speakers, along with the speaker cable and remove it away from the computer [2].
26
Disassembly and reassembly