Installing the WLAN Card
1
Insert the WLAN card in its slot on the computer.
2
Route the antenna cables through the routing channel and connect them to the WLAN card.
3
Align the shield and tighten the M2.0x3.0 screw to secure the WLAN card to the computer.
4
Install the:
a
b
c
5
Follow the procedures in
After working inside your computer
.
Solid State Drive — optional
Removing the M.2 Solid State Drive -SSD module
1
Follow the procedures in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the SSD module:
a Remove the M2.0x3.0 screw that secures the thermal plate to the computer.
b Remove the thermal plate from the computer.
c Remove the M2.0x3.0 screw that secures the SSD to the computer.
d Remove the SSD away from the computer.
Disassembly and reassembly
21
