Installing the WWAN card
NOTE:
Depending on the configuration you choose, you may or may not have WWAN card.
1
Slide the WWAN card to the WWAN card slot.
2
Replace the M2.0x3.0 screw to secure the WWAN card to the computer.
3
Route the antenna cables through the routing channels and connect them to the WWAN card.
4
Install the:
a
b
c
5
Follow the procedure in
After working inside your computer
.
WLAN card
Removing the Wireless Local Area Network - WLAN card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the WLAN card from the computer:
a Remove the M2.0x3.0 screw that secures the WLAN card to the computer [1].
b Remove the shield that secures the antenna cables [2].
c Disconnect and un-route the antenna cables connected to the WLAN card and remove the WLAN card from the computer [3,4].
20
Disassembly and reassembly
